Latex Hood with Breath Control Hole for Play Suffocating Rubber Mask Back Zipper

Notice:(1) Lightly dust the inside of the garment with talc before putting on .(2)Use a silicone-based lubricant to shine,Apply a thin coating to the inside of the garment and your skin if necessary.(3)Never contact with copper, brass or bronze ,Never expose latex to essential oils ,Never expose your garment to naked flame and fire as rubber burns .(4)Rubber can easily be marked or torn with fingernails if excessive force is used when pulling on your garment,Make sure your garment is well lubricated or talced. You may also wish to wear a pair of light cotton gloves to avoid any damage.(5)These measurements are approximate and can vary slightly. These are unstretched measurements. Please remember latex will stretch roughly 10-15%. Try selecting a size that is an inch or two smaller than your actual size for that tight fit feel. Ultimately however, it is a matter of personal preference.CleaningWash rubber garments in warm water. Avoid detergents and soaps. Always wipe away excess ater with a soft towel and leave to dry flat or hung up to drip dry.Never tumble dry, dry clean or iron the garmentStorageHung up in a cupboard away from sources of heat, light (particularly bright sunlight and strong UV light which will degrade light coloured clothes), metals, oils, solvents, greases and fire.

• Rubber
• Zipper closure
• Dry Clean
• Please Refer to Our Size Chart in the Pictures of the Product on the Left.
• 100% Natural Latex 100% Handmade.It's made by 0.3mm-0.4mm Latex Materials.
• Because latex clothes are handmade, it takes 7-15 working days,Please wait patiently.